Mobile in side parts

Card Level Parts of a Mobile Cell Phone                                  

1. Front Facia or Facial: This is the front cover or housing of any mobile phone. These are of different shapes and sizes depending upon brand and model.

2. Back Facia or Facial: This is the Back cover or housing of any mobile phone. These are of different shapes and sizes depending upon brand and model.

3. Internal Facia or Facial: This is the internal skeleton of a mobile phone.

4. Ringer: This part of component in a mobile phone is also called loudspeaker. It plays loud sound and music in mobile phone.

5. Speaker: This part or component is also called earpiece. It helps to listen to sound during phone call when the loudspeaker or headphone is NOT ON.

Mobile Phone Speaker

6. Microphone: It is also called Mic in short. It transmits sound of the speaker during phone call. It also helps to record sound in a mobile phone. It other words, microphone is a sound input device.

7. Vibrator: It is also called motor. It creates vibration in a cell phone when vibration mode setting is turned ON.

8. LED: Light Emitting Diode. These components produce light in a mobile cell phone.

LED of Mobile Phone

9. Charging Connector: It helps to connect the charger to the PCB of a mobile phone to charge or recharge the battery.

Mobile Phone Charging Connector

10. Headphone Connector: It is also called Earphone Connector. It helps to connect the headphone to the mobile phone via jack.

Mobile Phone Headphone Connector

11. Data Cable Connector: It helps to connect the mobile to another device such as a computer, laptop, table etc using a data cable.

Data Cable Connector of Mobile Phone

12. Battery: It supplies power or DC current to the mobile phone.

13. Battery Connector: It connects the battery to the internal circuit tracks of the PCB of a mobile phone.

Mobile Phone Battery Connector

14. SIM Card: Subscriber Identification Module. This is a small rectangular chip with circuit and information of user of the card. A SIM card is necessary to make or receive phone calls with a mobile phone.

SIM Card

15. SIM Card Connector: It connects the SIM card to the Circuit or PCB of a mobile phone.

SIM Connector

Memory Card: It is used to store data like document, music, videos etc. These are available in different capacities like 1GB, 2GB, 4GB, 8GB, 16GB, 32 GB etc.

Memory Card

16. Memory Card Connector or MMC Connector: It connects the memory card to the PCB of a mobile phone.

Mobile Phone Memory Card Connector

17. Camera: It is used to capture still images or record videos. These are available in different.

Camera of Mobile Phone

18. Camera Connector: It connects the camera to the PCB of the mobile phone.

Mobile Phone Camera Connector

19. Keypad Button: It is connected to the keypad carbon to enter numbers to make phone calls and other data.

Mobile Phone Keypad

20. Keypad Carbon: It is present in between keypad button and the PCB. It connects the keypad buttons to the PCB of a mobile phone.

Mobile Phone Keypad Carbon

21. Keypad Connector: It connects the keypad to the PCB of the cell phone.

Mobile Phone Keypad Connector

22. ON / OFF Switch: It helps to switch the mobile phone ON or OFF.
23. Display: It is screen of the mobile phone.

24.   Mobile Phone ON-OFF Switch

25. Display Connector: It connects display of screen to the PCB of a Mobile Phone.

Mobile Phone Display Connector

26. Internal Antenna: It helps to capture network

Internal Antenna of Mobile Phone

27. PCB: of the Mobile Phone.

Mobile Phone PCB

28. PDA: Display or Screen of a touch screen mobile phone.

Mobile Phone PDA

SAMSUNG GT-S5360 FLASH

SAMSUNG GT-S5360




STEP 1.ODIN TOOL,FLASH FILE,DRIVERS FOR FLASH FILE OPEN  LINK
https://www.4shared.com/rar/0EW7JcPpce/S5360_DXMA1_QLBMA1_DXLL1_teste.html

https://www.youtube.com/watch?v=uPOZye_BUVI

Mobile repairing notes

Battery Connectors 

This the interface where the battery connects and supply the voltage  to the cellphones main circuitry or PC Board. Old models used 4 pin which lead to four battery output sources such as +(positive) - (negative) BSI (battery status indicator)  and Btemp  (Battery Temperature)
The latest designs consists of only three pins, The + (positive) - (negative) and BSI  (battery status indicator) the Btemp is diminished and still in cellphone circuitry included.

Antenna's 
Antennas are used to intercepts and boost network signals, without it the phone will hardly connects to service providers and results network signal lost.
Antennas also consists of many types and sizes and varieties. It varies according to how each manufacturers designs. It is made of thin brass or stainless metal mounted on a plastic packaging.

Mobile repairing course

1. 1G: 1^St Generation in Mobile Telephony.
2. 2G: 2^Nd Generation in Mobile Telephony.
3. 3G: 3^Rd Generation in Mobile Telephony.
4. 4G: 4^Th Generation in Mobile Telephony.
5. AC: Alternate Current.
6. BGA: Ball Grid Array.
7. BSI: Battery Status Indicator.
8. CDMA: Code Division Multiple Access.
9. CPU: Central Processing Unit.
10. DCT: Digital Core Technology.
11. DC: Direct Current.
12. GSM: Global System for Mobile Communications.
13. IMEI: International Mobile Equipment Identity.
14. IC: Integrated Circuit.
15. LED: Light Emitting Diode.
16. PDA: Personal Digital Assistant.
17. PFO: Power Frequency Oscillator.
18. PCB
19. RAM: Random Access Memory.
20. RF: Radio Frequency.
21. ROM: Read Only Memory.
22. RTC: Real Time Clock.
23. RX: Receive / Receiver (Receiving Section).
24. SMD: Surface Mount Device.
25. TX: Transmit (Transmitting Section).
26. UEM: Universal Energy Manager.
27. VCO: Voltage-Controlled Oscillator.

SMART PHONE CHARGING repairing

SMART PHONE CHARING IC

https://youtu.be/KUk0KeDeH-E